Development of a rain simulator for a HV laboratory

Juan C. Ochoa; Jonathan S. Macas; Flavio P. Quizhpi; Mateo C. Quizhpi; Francisco J. Gomez

doi:10.1109/ROPEC.2018.8661354

Development of a rain simulator for a HV laboratory

Juan C. Ochoa, Jonathan S. Macas, Flavio P. Quizhpi, Mateo C. Quizhpi, Francisco J. Gomez

Energy Research Group (GIE)

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

Abstract

Tests in rainy conditions are mostly used to determine the behavior of the dielectric elements against moisture. This project presents the development and construction of a sprinkler type rain chamber, which was designed according to the needs and dimensions of the high voltage laboratory of the 'Universidad Politécnica Salesiana Sede Cuenca'. The guidelines established by the IEEE Std. 4-2013 are followed for both flow rates, pressures and water treatment to achieve the resistivity value of the normalized liquid for the different tests. The camera is built with fiberglass and tempered glass, with the respective hydraulic circuits to produce the precipitation. The project is complemented with a table of simulator prices and a behavior test of a pin type insulator in dry and wet conditions.

Original language	English
Title of host publication	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781538659359
ISBN (Print)	9781538659359
DOIs	https://doi.org/10.1109/ROPEC.2018.8661354
State	Published - 5 Mar 2019
Event	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018 - Ixtapa, Guerrero, Mexico Duration: 14 Nov 2018 → 16 Nov 2018

Publication series

Name	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

Conference

Conference	2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018
Country/Territory	Mexico
City	Ixtapa, Guerrero
Period	14/11/18 → 16/11/18

Bibliographical note

Publisher Copyright:
© 2018 IEEE.

Keywords

Aspersion
High voltage laboratory
Pin type insulator
Precipitation
Rain Simulator

Access to Document

10.1109/ROPEC.2018.8661354

Cite this

Ochoa, J. C., Macas, J. S., Quizhpi, F. P., Quizhpi, M. C., & Gomez, F. J. (2019). Development of a rain simulator for a HV laboratory. In 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018 Article 8661354 (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ROPEC.2018.8661354

@inbook{a6a3ae56b34d481497d7571381f67eb8,

title = "Development of a rain simulator for a HV laboratory",

abstract = "Tests in rainy conditions are mostly used to determine the behavior of the dielectric elements against moisture. This project presents the development and construction of a sprinkler type rain chamber, which was designed according to the needs and dimensions of the high voltage laboratory of the 'Universidad Polit{\'e}cnica Salesiana Sede Cuenca'. The guidelines established by the IEEE Std. 4-2013 are followed for both flow rates, pressures and water treatment to achieve the resistivity value of the normalized liquid for the different tests. The camera is built with fiberglass and tempered glass, with the respective hydraulic circuits to produce the precipitation. The project is complemented with a table of simulator prices and a behavior test of a pin type insulator in dry and wet conditions.",

keywords = "Aspersion, High voltage laboratory, Pin type insulator, Precipitation, Rain Simulator",

author = "Ochoa, {Juan C.} and Macas, {Jonathan S.} and Quizhpi, {Flavio P.} and Quizhpi, {Mateo C.} and Gomez, {Francisco J.}",

note = "Publisher Copyright: {\textcopyright} 2018 IEEE.; 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018 ; Conference date: 14-11-2018 Through 16-11-2018",

year = "2019",

month = mar,

day = "5",

doi = "10.1109/ROPEC.2018.8661354",

language = "English",

isbn = "9781538659359",

series = "2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018",

address = "United States",

}

Ochoa, JC, Macas, JS, Quizhpi, FP , Quizhpi, MC & Gomez, FJ 2019, Development of a rain simulator for a HV laboratory. in 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018., 8661354, 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018, Institute of Electrical and Electronics Engineers Inc., 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018, Ixtapa, Guerrero, Mexico, 14/11/18. https://doi.org/10.1109/ROPEC.2018.8661354

Development of a rain simulator for a HV laboratory. / Ochoa, Juan C.; Macas, Jonathan S.; Quizhpi, Flavio P. et al.
2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018. Institute of Electrical and Electronics Engineers Inc., 2019. 8661354 (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018).

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

TY - CHAP

T1 - Development of a rain simulator for a HV laboratory

AU - Ochoa, Juan C.

AU - Macas, Jonathan S.

AU - Quizhpi, Flavio P.

AU - Quizhpi, Mateo C.

AU - Gomez, Francisco J.

PY - 2019/3/5

Y1 - 2019/3/5

N2 - Tests in rainy conditions are mostly used to determine the behavior of the dielectric elements against moisture. This project presents the development and construction of a sprinkler type rain chamber, which was designed according to the needs and dimensions of the high voltage laboratory of the 'Universidad Politécnica Salesiana Sede Cuenca'. The guidelines established by the IEEE Std. 4-2013 are followed for both flow rates, pressures and water treatment to achieve the resistivity value of the normalized liquid for the different tests. The camera is built with fiberglass and tempered glass, with the respective hydraulic circuits to produce the precipitation. The project is complemented with a table of simulator prices and a behavior test of a pin type insulator in dry and wet conditions.

AB - Tests in rainy conditions are mostly used to determine the behavior of the dielectric elements against moisture. This project presents the development and construction of a sprinkler type rain chamber, which was designed according to the needs and dimensions of the high voltage laboratory of the 'Universidad Politécnica Salesiana Sede Cuenca'. The guidelines established by the IEEE Std. 4-2013 are followed for both flow rates, pressures and water treatment to achieve the resistivity value of the normalized liquid for the different tests. The camera is built with fiberglass and tempered glass, with the respective hydraulic circuits to produce the precipitation. The project is complemented with a table of simulator prices and a behavior test of a pin type insulator in dry and wet conditions.

KW - Aspersion

KW - High voltage laboratory

KW - Pin type insulator

KW - Precipitation

KW - Rain Simulator

UR - http://www.scopus.com/inward/record.url?scp=85063897244&partnerID=8YFLogxK

UR - http://www.mendeley.com/research/development-rain-simulator-hv-laboratory

U2 - 10.1109/ROPEC.2018.8661354

DO - 10.1109/ROPEC.2018.8661354

M3 - Chapter

AN - SCOPUS:85063897244

SN - 9781538659359

T3 - 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

BT - 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018

Y2 - 14 November 2018 through 16 November 2018

ER -

Ochoa JC, Macas JS, Quizhpi FP , Quizhpi MC, Gomez FJ. Development of a rain simulator for a HV laboratory. In 2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018. Institute of Electrical and Electronics Engineers Inc. 2019. 8661354. (2018 IEEE International Autumn Meeting on Power, Electronics and Computing, ROPEC 2018). doi: 10.1109/ROPEC.2018.8661354

Development of a rain simulator for a HV laboratory

Abstract

Publication series

Conference

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this